Elaine Townsend Table July 08th, 2018 - 20:27:08
Once a three-dimensional prototype is created, the design can then be refined. The prototype allows you to view the tables from all angles and fine tune the spacing of the steel round-bar. The number of pieces used to build the table can also be changed. Sometimes additional pieces need to be added either for functional stability or from a design standpoint. Sometimes I remove pieces to open up the design.
Whichever way you go, choose the head table set up that works the best for your particular family situation and reception venue. Once you weigh all of your options, one style of seating is going to emerge as the most practical for your wedding. And then you can breathe a sigh of relief, as you cross "head table seating" off of your to-do list!
Dining: Have you ever invited guests over for dinner and then realised that you don't have enough space to seat them all? Your dining table just isn't big enough, or you don't even own one? Well, a trestle table can solve that problem. It can easily be used to increase your dining space. A four foot table can seat four to six people, and a six foot table can seat six to eight. And if you have a dining table too, these seats can be extra.
Large wicker picnic hampers can also work in this way too, although they do not provide a very uniform top surface. They do though look stylish, particularly when aged.
A half moon table is a table in the shape of half of a circle or oval. Essentially it is flat on one side (the side that is usually placed against a wall), and curved on the other. They resemble, not surprisingly, a half moon. A table if this type can be made of glass, wood or any other substance. They usually range in length from two to six feet and have a width roughly twenty five to forty percent of their length.
Once the overall look has been achieved, work can then begin on a finished version. Measurements must be taken and angles must be figured. There is a lot of math involved. Now each individual piece of steel can be cut and precisely fit to another. All connecting points must be hand welded and each weld must be hand ground. The last step is a chemical oxidation process to turn the steel either brown or black and then a few coats of clear paint are applied to protect the colored finish.