Carlene Lindsey Table September 06th, 2018 - 10:43:39
After defining a general style for the new tables, actual designs must be created. In some cases a finished product can be fabricated from a sketch alone. That is not the case with these tables however. Prototypes have to be built based on very rough sketch concepts. The tables have to ultimately be designed three-dimensionally by actually cutting and welding steel. The rough sketches are used as a basic starting point but the overall design is not completely determined beforehand. I use the "design as you go" approach" and each table takes shape on the fly.
A folding trestle table is so handy to own. Once you do, you'll wonder how you ever coped without one. So, what exactly can you do with your trestle table? Here are a few ideas.
Wedding table settings, for example, are supposed to reflect the romantic, exciting atmosphere of the evening. Each idea has its own style and look. A baby shower table arrangement will probably look much different from a Valentine day one.
Because they are curved on the side that extends out into the room, these tables take up less room than square or rectangular tables. They also do not have any sharp points, as square and rectangular tables do. This makes them much safer, especially in a home that has children. The sharp edges of rectangular tables are often at the head level of young children. This makes a table with a half moon shape a good choice for homes with children.
Whichever way you go, choose the head table set up that works the best for your particular family situation and reception venue. Once you weigh all of your options, one style of seating is going to emerge as the most practical for your wedding. And then you can breathe a sigh of relief, as you cross "head table seating" off of your to-do list!
Once the overall look has been achieved, work can then begin on a finished version. Measurements must be taken and angles must be figured. There is a lot of math involved. Now each individual piece of steel can be cut and precisely fit to another. All connecting points must be hand welded and each weld must be hand ground. The last step is a chemical oxidation process to turn the steel either brown or black and then a few coats of clear paint are applied to protect the colored finish.